-01222.jpg)
Overview
From performance and cost savings to more time to focus on the bottom line, the Toro Turf Pro puts innovation and efficiency at your command. With GPS RTK technology, the Turf Pro navigates with a 0.75– 1.25" (2–3 cm) level precision, enabling it to mow a consistent pattern with a minimal overlap. The mobile app allows you to remotely control your robot or fleet of robots. Start or stop your machines at any time from anywhere, receive alerts and automate certain processes.
Turf Pro 300
- Ultra precise navigation via GPS-RTK technology—no boundary wires required
- All-electric, autonomous mower is self charging
- Wirelessly monitor and control your units
- Customize settings at your fingertips—working perimeters, no-go zones, mowing pattern, cutting height, transport paths, etc.
- Mow up to 11.1 acres (45,000 m2)
|
Turf Pro 300
Technical specification
| Adjustment of Cutting Heads |
Electronic |
| Average Battery Charge Time (min) |
90 |
| Average Run Time (min) |
280 |
| Dimensions |
39.4 in. x 41.1 in. x 18.3 in. (100.2 cm x 104.4 cm x 46.6 cm) |
| Energy |
491.5Wh |
| Front Lift Sensors |
2 |
| GPS Location |
RTK |
| Maximum Cut Height (Standard Disc / Low Height Disc) |
3.9 in / 3.5 in / 100 mm / 90 mm
|
| Maximum Noise Level |
52 dB |
| Maximum Slope |
35% / 19.5º |
| Maximum Working Area |
11 acres / 45,000 m2 |
| Minimum Cut Height (Standard Disc / Low Height Disc) |
0.75 in / 0.60 in / 20 mm / 15mm
|
| Mowing / Picking Width |
25 in / 63.3 cm |
| Mowing/Working Speed |
Up to 1.7 mph / 2.8 km/h
|
| Nominal Capacity |
19.2Ah |
| Nominal Voltage |
25.6V |
| Number of Cutting Blades |
9 |
| Number of Cutting Heads |
3 |
| Rear Collision Sensors |
2 |
| Rear Lift Sensors |
2 |
| Recommended Working Area |
8.6 acres / 35,000 m2 |
| Resistive Bumper For Collision Detection |
1 |
| Roll Over / Tilt Sensor |
1 |
| Security PIN Code |
Yes |
| Sonars For Obstacle Detection |
5 |
| Working Temperature Range |
23°F to 140°F (-5°C to 60°C) |
|
-01222.jpg)